Queen Pack
Queen pack is a component pack for the further assembling and mounting the control system:
Consistence of Queen Pack
Item | Photo | Pcs | Comments, requirements, models |
|---|---|---|---|
1. 220V | |||
1.1. circuit breaker |  | 1 | L and N breaking, minimal requirements: 15A current |
1.2. power strip |  | 2 | minimal requirements: 6 sockets, 10A current |
 | 1 | PLC для подключения электроники | |
3. Processor module | |||
3.1. Raspberry Pi |  | 1 | exact model : raspberry pi 3 model B |
3.2. micro-SD card |  | 1 | SD-card for raspberry pi, minimal requirements: class 10, 8GB |
3.3. RPI power supply |  | 1 | power supply adapter for raspberry pi, minimal requirements: 5V, 2A |
4. Audio system | |||
4.1. Aidio amplifier |  | 1 | exact model : TDA7498 chip based amplifier |
4.2. USB sound card |  | 1 | exact model : creative SB play 3 |
5. Power supply | |||
5.1. 24VDC power supply |  | 1 | target: audio amplifier, minimal requirements: at least 200W |
5.2. 12VDC power supply | | 1 | target: locks, light, etc, minimal requirements: at least 500W |
5.3. 5VDC power supply |  | 1 | target: sensors, minimal requirements: at least 30W |
6. Serial to ethernet converter | |||
6.1. serial server |  | 1 | exact model : USR-TCP232-410S |
6.2. serial server power supply |  | 1 | in box with serial server |
7. Ethernet switch | |||
7.1. ethernet switch |  | 1 | exact model : D-LINK DES-1008C/A1A |
7.2. ethernet switch server power supply | | 1 | in box with ethernet switch |
8. Connectors, clamps, bus | |||
8.1. ground bus |  | 6 | minimal requirements: 20 terminals, 50A current, copper or brass material |
8.2. din rail |  | 1 | generic din rail, at least 5cm length |
8.3. clamp for the GND |  | 1 | |
9. Cables | |||
9.1. rj45 patchcoords |  | 2 | |
9.2. serial RS232 cable |  | 1 | in box with serial server |
9.3. minijack3.5 to 2xRCA |  | 1 | |
9.4. cables with AC socket |  | 3 | cut socket from the cable for AC/DC power supply |
10. Multicolor wires | |||
10.1. Yellow wire 4mm2 | 1 | powering +12V to the terminal bus BUS+12VDC | |
10.2. Yellow wire 4mm2 | 1 | powering +12V to the terminal bus BUS+12VDC | |
10.3. Blue wire 4mm2 | 1 | minus to the terminal bus BUS-VDC | |
10.4. Blue wire 4mm2 | 1 | minus to the terminal bus BUS-VDC | |
10.5. Blue wire 1.5mm2 | 1 | PWM minus extension | |
10.6. Blue wire 1.5mm2 | 1 | uniting a minus for 12VDC and 5VDC | |
10.7. Blue wire 1.5mm2 | 1 | minus to the amplifier from 24VDC power supply | |
10.8. Blue wire 1.5mm2 | 1 | minus for queen board | |
10.9. Yellow wire 1.5m2 | 1 | powering +12V to the queen board | |
10.10. Brown wire 1.5mm2 | 1 | powering +5V to the terminal bus BUS+5VDC | |
10.11. Brown wire 1.5mm2 | 1 | powering +5V to the terminal bus BUS+5VDC | |
10.12. Brown wire 1.5mm2 | 1 | powering +24V to the amplifier from 24VDC power supply |